Surf Inspired:
Get our popular design in the Surf Starter and zero in on the next wave. We shaved weight off the nose to carve a turn with quicker precision compared to our elliptical models. The stable fish/swallow tail keeps your base grounded as you whip this board in, out and around. Bump up your dry land training and your next session will be amazing.
Get Your Feet Wet:
Large ride stance area can be used directly over the bolt holes or moved out another 6" inches to the ends. Plenty of space for two balls or half balls for upper body exercises. Pop up moves will require you to keep a narrow landing stance over to the rail with this model. This board will allow a variety of moves and positions
Balance On This:
Get Started Here:
Create your own unique combo with this board. Add the Balls and Half Balls that meet your training needs. Features an adjustable rail that can be lengthened or shortened in 4" inch sections. A great board choice for those who will grow with their board and want to practice a wide range of stances.
3" Mini Balls:
3" Mini Ball is quick, responsive and requires fine tuning of your movements. With little board tilt and a ton of forward and backward ride space, you r board control will always be challenged to stay level. Staying centered is no easy feat with this Mini Ball. Combine both balls under the board for the double pivot system for skill progression
5" Small Balls:
5" Small ball makes the transition from smooth moves to fast turning very easy. Enough space for forward and backward motion to give you 360o degrees of free movement. Get up high with lots of board tilt and feel your hips control the board. This combo is fun and responsive.
5" Half Balls:
5" Half Balls are great for practicing pop ups and plank walking at the beginner level. Create your own rocker or wobble board and combine lower body balance with upper body complex moves.
6.5" Half Balls:
6.5" Half ball gives you greater board tilt and ability to rotate on the half ball. Perfect for developing your carving and rotation power as you kick this board around. Place the 3" Mini Balls inside of the 6.5" Half Ball to create the Thrasher or Rock and Roll advanced combo. Place the 5" Ball inside the 6.5" Half Ball to create the Big Drop combo. These are both great for unpredictable movements to simulate rough water or windy conditions.
Extend Your Rail and Ride Space
Customize Your Balance Board!
All Si Boards Starter Boards come with an adjustable urethane rail. All parts are interchangeable with the same interlocking joint system. Starter Boards come with a smaller rail compared to the Original Boards and give you the option to extend your rail to the maximum ride space. Progress or regress your ride space based on your skills.
Can I Use 4" Extensions?
Yes! This extension length gives your 24" of ride space. If using existing hole configuration your rail will be offset more to the back or front of the board. An offset rail will focus your ride skills to either the back or front of the board. If you want a centered rail you will need to drill a completely new hole pattern.
Can I use 8" Extensions?
Yes! This is the best Rail Extension length. This gives you maximum ride space to 28" similar to our Surf Original board. The rail will be centered and 6 new holes will need to be drilled. It is best to use the 5" Small Ball and 6.5" Half Ball for optimal performance.
Elysia's Notes:
Most new Si Boarders chose this board because they want to learn how to surf or want to stay in shape between sessions. Many added the 8" rail extensions to get a wider stance. I love this board for the large ride surface and small compact rail. It stores easily and fits into bags for travel. I know I can train a variety of users in full body moves and rotational control.
Download our 5 Day Surf Training Program and get ready to master your next surf trip!
5 Day Surf Training Program
Balance Board Progression From Beginner To Advanced:
Si Boards are built for ultimate exercise versatility, skill progression and to be your everlasting balance board system. Our Starter Boards are a great introduction to balance training for beginners, training on the go and as a fun family activity. You will create a truly functional exercise program using our Balls and Half Balls.
2 Super Cool Downloads Below
Si Boards 6 x 6 Matrix of Versatility for Infinite combos: click here
Si Boards 16:1 Balance Boards unique combos: click here
Basic Combos: From Beginner to Advanced
1. Rocker Board: 2 Half Balls
Place Half Balls flat side up for faster tilt. Using two creates a Rocker Board that tilts in 2 directions - Left and Right for example. The farther the Half Balls are from one another, the more stable the surface. You can place them very close together for more challenge. This is great for holding a position and rocking the board left and right to activate your muscle coordination.
2. Wobble Board: 1 Half Ball
Place 1 Half Ball under your board and it will tilt in all directions and allow you to twist the board. Place in the center for an equal weight distribution. Place to the side and you will activate the side directly over the Half Ball. This is great for developing strength on one side if it is weaker or unable to function the same after an injury.
3. Single Pivot Board: 1 Half Ball and 1 Ball
Place 1 Half Ball under the left side of the board and 1 Ball under the right side of the board. The left side will tilt front to back and the right side will pivot or slide forward and backward. A great progression to learning how to activate hip rotation on a moving board on one side of your body.
Best set up: 3" Ball and 6.5" Half Ball or 5" Ball and 8.5" Half Ball
4. Double Pivot Board: 2 Balls
Use 2 of the same sized ball under your board to activate each side in rotation. Placing the Balls close is more difficult. You will get multi-direction motion without the extreme tilting from left to right feet. A perfect combo for advanced skills like surf pop-up, quadruped, deep squats and adding difficult upper body battle rope exercises while maintaining balance.
5. Multi-Direction Board: 1 Ball
The heart of the Si Board is riding on 1 Ball for a multi-direction platform. The freedom to move left/right, front/back, twist, diagonal, clockwise/counterclock and 360 spins all at the same time. This is the most advanced balance board skill to learn fine motor skill and full body awareness.
Specialty Combos: for Unpredictable Training
6. Rock and Roll: Small Ball inside of Half Ball x 2
Placing a small Ball inside the Half Ball creates two moving surfaces. The small Ball rolls around inside of the Half Ball. The Half Ball is placed flat side up and creates a rocking or wobble motion. Four moving surfaces that keep you level and don't allow the board to roll to extremes. You feel all surfaces continuously knock into each other abruptly. Perfect for deep stance endurance simulating rough water and windy conditions.
Use these combos:
- 3" Mini Ball rolling inside a Vortex 5" Half Ball or 6.5" Half Ball at each end
- 5" Small Ball rolling inside a 8.5" Half Ball at each end
7. Thrasher: Small Ball inside of Half Ball x 1
Placing a small Ball inside the Half Ball creates two moving surfaces. The small Ball rolls around inside of the Half Ball. The Half Ball is placed flat side up and creates a rocking or wobble motion. Two moving surfaces that give you extreme tilts in all direction with slight board rolling. Perfect for holding your push-up position against an opponent and a narrow squat with very quick foot reactions.
Use these combos:
- 3" Mini Ball rolling inside a Vortex 5" Half Ball or 6.5" Half Ball
- 5" Small Ball rolling inside a 8.5" Half Ball
8. Ball Big Drop: Medium Ball fixed tight inside a large Half Ball
Wedge a Ball inside the Half Ball so that the two parts do not move. You have two different sized balance points and this gets you up high off the ground. You will teeter/hover around and just as the Half Ball gets to the edge you will feel a fast drop to the ground. Reaction to this feels like a sudden drop and being able to control landing on you sport board.
Use these combos:
- 5" Small Ball fixed tight inside a 6.5" Half Ball
- 6.5" Medium Ball fixed tight inside a 8.5" Half Ball
How To Change The Rail
Children should always be supervised. Use safety googles and equipment with proper tool use.
Click here to see the Rail Extension Instructions
Remove The Rail:
- Use a Phillips head screwdriver and remove the bolts
- Remove the rail from the board
- Add or remove the 4" or 8" Extension pieces to the rail
- Make sure the new rail will fit on the board
Marking The New Holes With Paper Template:
- Use the existing holes when possible
- Trace a new rail template on paper or newsprint and mark the holes
- Place a ruler along the holes to make sure they all light up on a straight line
- Cut the template out
- Place template on board in desired position
- Mark the new bolt pattern on the board top using a pen or make a mark with a hammer and nail
Marking the New Holes Using The Rail:
- Use the existing holes when possible
- Place the new rail over the existing bolt holes
- Mark the new bolt pattern on the board top using a pen or make a mark with a hammer and nail
- Place a ruler along the holes to make sure they all light up on a straight line
Attaching The Rail:
- Drill a 3/16" hole for the new bolts
- Place a piece of scrap wood under the board to prevent the hole from splintering when drilling
- Lightly sand any splinters
- Insert bolts into board top
- Place rail on the board bottom and bolts
- Hand tighten each bolts half way
- Then tighten each bolt completely until the rail is secure
- Bolt should be flush with the board top
- Do not over tighten the bolts or sink too far below board top
- Check all hardware for security
- Turn board over and ride like a champion!
