DIY Creator Kits Tech Specs

Back to DIY Creator Kits

 

The Fine Details About Our Urethane Rails
Creator Kits allow you the freedom to design and assemble your own unique multi-directional balance board. We supply the parts and you inspire the builder within.

Urethane Rail:

  • Solid construction with no voids or recesses.
  • Extremely durable to abrasion and rough surfaces compared to plastic materials.
  • 1" thick by 1" height.
  • Rigid hardness with slight flexibility for stability and contouring to your board.
  • Rail connects with a male/female locking design.
  • Nuts are secured deep into the rail to avoid contact with the ground.
  • Design allows some variability to the nut and bolt placement if you drilled slightly off your mark.
  • Rail can be expanded in length by 4". Several extension pieces can be used.
  • Slight taper at the top to soften the feel of the ball against the rail compared to a sharp rectangular edge.

Skate Kit:
This rail is attached to the kids Kick Start board.

  • 12.25” x 6.25” horseshoe urethane ends
  • 4" urethane extensions
  • 8 Phillips flat head machine screws 3/16" x 1" x 10-32 threading for countersinking
  • 8 nylon insert locking nuts
  • 3" solid urethane Mini ball
  • Assembly instructions

Starter Kit:
This rail is attached to all Starter boards.

  • 16” x 9.5” horseshoe urethane ends
  • 4" urethane extensions
  • 8 Phillips flat head machine screws 3/16" x 1 1/4" x 10-32 threading for countersinking
  • 8 nylon insert locking nuts
  • 3" solid urethane Mini ball
  • Assembly instructions